BNNaviMessageInfo.h

//
//  BNNaviMessageInfo.h
//  NaviSDKDemo
//
//  Created by linbiao on 2018/12/25.
//  Copyright © 2018年 李择一. All rights reserved.
//
 
#import <Foundation/Foundation.h>
#import "BNCommonDef.h"
#import <UIKit/UIKit.h>
@interface BNNaviMsgBase : NSObject
 
@property(nonatomic,assign)BNaviMessage_Type_Enum eMsgType; // 消息类型 - navigation message type
 
@end
@interface BNaviEtaRemainUIInfo : NSObject
@property(nonatomic,copy)NSString *remainDist;                // 剩余距离 - remain distance
@property(nonatomic,copy)NSString *remainTime;                // 剩余时间 - remain time
@property(nonatomic,copy)NSString *arrivalTime;                 
 
@end

/*
 kmValue和mValue：为-1表示无效值，大于等于0为有效值。如果距离需要展示为km，则kmValue为有效值，mValue为无效值，如果距离需要展示为m，则mValue为有效值，kmValue为无效值。如果距离不需要用数字展示（比如可能展示【现在】），则kmValue和mValue均为无效值。
 distanceDescription：表示距离展示的UI数据，比如【8.9公里】【200米】、【现在】
 例子：
 导航中UI展示【8.9公里】，则kmValue为8.9，mValue为-1，distanceDescription为【8.9公里】
 导航中UI展示【200米】，则kmValue为-1，mValue为200，distanceDescription为【200米】
 导航中UI展示【现在】，则kmValue为-1，mValue为-1，distanceDescription为【现在】
 */
@interface BNaviDistanceDescriptionModel : NSObject
@property (nonatomic, assign)  CGFloat kmValue;
@property (nonatomic, assign)  CGFloat mValue;
@property (nonatomic, copy) NSString *distanceDescription;
 
@end

/*
 hour、minute、dayType为小时、分钟、天的原始数据，timeDescription为UI展示数据
 例子：
 全程剩余时间：
 （1）导航中UI展示【47小时57分】，hour为47，minute为57，dayType为BNaviDayType_Invalid，timeDescription为【47小时57分】
 （2）导航中UI展示【57分】，hour为0，minute为57，dayType为BNaviDayType_Today，timeDescription为【57分】
 到达时间：
 （1）导航中UI展示【13:02到达】，hour为13，minute为2，dayType为BNaviDayType_Today，timeDescription为【13:02】
 （2）导航中UI展示【明天23:33到达】，hour为23，minute为33，dayType为BNaviDayType_Tomorrow，timeDescription为【明天23:33】
 */
@interface BNaviTimeDescriptionModel : NSObject
@property (nonatomic, assign)  int hour;
@property (nonatomic, assign)  int minute;
@property (nonatomic, assign) BNaviDayType dayType;
@property (nonatomic, copy) NSString *timeDescription;
 
@end

@interface BNaviRemainInfo : BNNaviMsgBase
 
@property(nonatomic,assign)BNaviMessage_Action_Enum eAction;    // 动作类型 - action type
@property(nonatomic,assign)NSInteger remainDist;                // 剩余距离 - remain distance
@property(nonatomic,assign)NSInteger remainTime;                // 剩余时间 - remain time
@property (nonatomic, strong) BNaviTimeDescriptionModel *remainingTimeModel;
@property (nonatomic, strong) BNaviTimeDescriptionModel *estimatedArrivalTimeModel;
@property (nonatomic, strong) BNaviDistanceDescriptionModel *etaRemainingDistanceModel;
@end
 

@interface BNaviSimpleGuideInfo : BNNaviMsgBase
@property(nonatomic,assign)BNaviMessage_Action_Enum eAction;    // 动作类型 - action type
@property(nonatomic,copy)NSString* nextRoadName;                // 下一路口名字 - next road name
@property(nonatomic,copy)NSString* turnIconName;                // 转向标图片名称 - name for lane change information indicating diagram
@property(nonatomic,assign)NSInteger totalDist;                 // 该段路总长度，单位：米 - total length of the route, in meter
@property(nonatomic,assign)NSInteger remainDist;                // 距离下一路口剩余长度，单位：米 - remain distance to the next road, in meter
@property(nonatomic,assign)NSInteger remainTime;                // 距离下一路况大概时间，单位：秒 - remain time to the next road, in second
@property(nonatomic,assign)BOOL isStraight;                     //是否处于顺行模式
@property(nonatomic, assign)BOOL bStraightIcon;              //区分下一个路口是添加沿 还是进入
//下一转向
@property (nonatomic, assign) BNaviManeuver_Kind_Enum nextTurnKind;
//当前转向
@property (nonatomic, assign) BNaviManeuver_Kind_Enum curTurnKind;
//下一个转弯到当前转弯的距离
@property (nonatomic, assign) NSInteger distCur2NextGP;
//下一个转弯是否为高速
@property (nonatomic, assign) BOOL bHighwayExCur2NextGP;
//当前路名，顺行模式显示当前路名
@property (nonatomic, strong) NSString* curRoadName;
@property(nonatomic,assign)NSInteger GPAddDist; // 机动点距离，用于判断前后是否相同机动点
//随后下一路名
@property (nonatomic, copy) NSString *nextNextRoadName;
@end
 

@interface BNaviStatusInfo : BNNaviMsgBase
 
@property(nonatomic,assign)BNaviStatus_Type_Enum eNaviStatusType; // 导航状态类型 - message type of navigation status
@property(nonatomic,assign)NSInteger eNaviSightType;              // 新增的导航状态类型
 
@end
 

@interface BNaviRasterExpandMap : BNNaviMsgBase
@property(nonatomic,assign)BNaviMessage_Action_Enum eAction;    // 动作类型 - Action type
@property(nonatomic,copy)NSString* bgImageId;                   // 背景图片id - ID for background image
@property(nonatomic,copy)NSString* iconId;                      // icon图片id - icon id
@property(nonatomic,retain)UIImage* bgImage;                    // 背景图片,下载了资源后才有,否则为nil - Need to download the corresponding data, otherwise, it will be nil.
@property(nonatomic,assign)NSInteger totalDist;                 // 总距离，单位：米 - total length, in meter
@property(nonatomic,assign)NSInteger remainDist;                // 剩余距离，单位：米 - remain distance, in meter
@property(nonatomic,assign)NSInteger remainTime;                // 剩余时间，单位：秒, remain time, in second
@property(nonatomic,copy)NSString * nextRoadName;               // 下一路口名字, next road name
@property(nonatomic,assign)BNaviRasterExpandMap_Type_Enum eRasterType;// 路口放大图类型, type of enlargement
@property (nonatomic, assign) int gridMapKind;                  //放大图分类，用于统计，详见RG_Grid_Kind_Enum类型
@property (nonatomic, copy) NSString *statParam; //诱导统计字段
@property(nonatomic,copy)NSString * straightIcon;               // 不为空就是直行路口
@property (nonatomic, assign)NSInteger addDist;                 //积算距离
 
@end
 

@interface BNaviCurrentRoadName : BNNaviMsgBase
 
@property(nonatomic,copy)NSString* curRoadName; // 当前路名, current road name
 
@end
 

@interface BNaviRemainTrafficlightsInfo : BNNaviMsgBase
 
@property(nonatomic,assign)NSInteger remainTrafficights;                // 离目的地剩余红绿灯
@property(nonatomic,assign)NSInteger viaRemainTrafficights;             // 离下个途经点剩余红绿灯
 
@end
 

@interface BNaviGPSChange : BNNaviMsgBase
 
@property(nonatomic,assign)BNaviGPS_Change_Enum eGpsChangeType; // 状态变化 - change type for gps
 
@end

@interface BNaviVectorExpandMap : BNNaviMsgBase
 
@property(nonatomic,assign)BNaviMessage_Action_Enum eAction;    // 动作类型 - action type
@property(nonatomic,assign)NSInteger totalDist;                 // 总距离，单位：米 - total distance, in meter
@property(nonatomic,assign)NSInteger remainDist;                // 剩余距离，单位：米 - remain distance, in meter
@property(nonatomic,assign)NSInteger remainTime;                // 剩余时间，单位：秒 - remain time, in second
@property(nonatomic,assign)double carRotAngle;                  // 车标旋转角度 - rotation angle for car
@property(nonatomic,assign)NSInteger carPosX;                   // 车标位置X - X-position for car
@property(nonatomic,assign)NSInteger carPosY;                   // 车标位置Y - Y-position for car
@property(nonatomic,copy)NSString* outRoadName;                 // 驶出道路名 - the next road name
@property(nonatomic,copy)NSString* straightIcon;                 // 直行图标
@property(nonatomic,assign)NSInteger imageWidth;                // 图片宽度，单位：像素 - width of image, in pixel
@property(nonatomic,assign)NSInteger imageHeight;               // 图片高度，单位：像素 - height of image, in pixel
@property(nonatomic,retain)UIImage* juncViewImage;              // 图片 - image of vector diagram enlargement
 
@end
 
 

@interface BNaviHighwayBoard : BNNaviMsgBase
 
@property (nonatomic,assign)  BNaviMessage_Action_Enum eAction;// 动作类型 - action type
@property (nonatomic,assign) NSUInteger exitRemainDist;        // 高速出口剩余距离
@property (nonatomic,retain) NSString *exitHighwayDirectName;  // 离开高速的方向名
@property (nonatomic,retain) NSString *exitHightwayNextRoadName;//离开高速进入的道路名
@property (nonatomic,retain) NSString *exitHighwayID;          // 离开高速的编号
@property (nonatomic,assign) NSUInteger tollGateTotalDist;     // 最近的收费站的剩余距离
@property (nonatomic,copy) NSString *tollGateName;             // 最近的收费站名称
@property (nonatomic,assign) NSUInteger saRemainDist;          // 最近的服务区剩余距离
@property (nonatomic,retain) NSString *highwaySAName;          // 最近的服务区名称
@property (nonatomic,assign) NSUInteger nextSARemainDist;      // 第二近的服务区剩余距离
@property (nonatomic,retain) NSString *nextHighwaySAName;      // 第二近的服务区名称
@property (nonatomic,retain) NSString *curHighwayRoadName;     // 当前高速路名
@property (nonatomic,assign) BOOL isLessGPMin;                 // 是否在距下一机动点3km以内，3km以内退出高速模式
@property (nonatomic, assign) BNaviManeuver_Kind_Enum exitHightwayTurnKind; //离开高速的转弯类型
 
@end
 

@interface BNaviInHighwayBoard : BNNaviMsgBase
 
@property (nonatomic,assign)  BNaviMessage_Action_Enum eAction; // 动作类型 - action type
@property (nonatomic,copy) NSString *highwayRoadName;           // 进入高速后路名
@property (nonatomic,assign) NSUInteger startDist;              // 进入高速总距离
@property (nonatomic,assign) NSUInteger remainDist;             // 进入高速后剩余距离
 
@end
 

@interface BNaviDirectionBoard : BNNaviMsgBase
 
@property (nonatomic,assign)  BNaviMessage_Action_Enum eAction; // 动作类型 - action type
@property (nonatomic,copy) NSString *directionName;             // 方向名
@property (nonatomic,copy) NSString *exitID;                    // 出口编号
@property (nonatomic,assign) NSUInteger startDist;              // 总距离
@property (nonatomic,assign) NSUInteger remainDist;             // 剩余距离
@property (nonatomic,assign) NSUInteger addDist;                // 积算距离
 
@end
 

@interface BNaviCarPosition : NSObject
 
@property(nonatomic,assign)double carPosX;          // 车标位置：x坐标 wgs84 - X-position in wgs84
@property(nonatomic,assign)double carPosY;          // 车标位置，y坐标 wgs84 - y-position in wgs84
@property(nonatomic,assign)double carRotateAngle;   // 车头与正北方向的夹角，单位：度 - angle between the direction of car and the due north, in degree
@property(nonatomic,assign)double carSpeed;         // 车标速度
@end
 
@interface BNaviRoadConditionItem : NSObject
@property(nonatomic,assign)int startPointToCurItemDistance;
@property(nonatomic,assign)BNaviRoadCondition_Type_Enum eRoadConditionType;
@end

@interface BNaviRoadConditionModel : NSObject
@property (nonatomic, copy) NSArray<BNaviRoadConditionItem *> *roadConditionArray;
 
@end

typedef NS_ENUM(NSUInteger, BNaviSignalModelState) {
    BNaviSignalModelState_Tunnel,               // 在隧道
    BNaviSignalModelState_Underground,        // 在地库
    BNaviSignalModelState_Weak,                 // 信号弱
    BNaviSignalModelState_Medium,               // 信号中
    BNaviSignalModelState_Strong,               // 信号强
    BNaviSignalModelState_BDNotHighPrecision,   // 北斗非高精定位
    BNaviSignalModelState_BDHighPrecision,      // 北斗高精定位
    BNaviSignalModelState_ServiceArea,          // 位于服务区
};
 
 
@interface BNaviSignalModel : NSObject
@property (nonatomic, copy) NSString *siginalText;
@property (nonatomic, copy) NSString *siginalImgName;
@property (nonatomic, assign) BNaviSignalModelState state;
 
@end

@interface BNaviMapRefreshInfo : BNNaviMsgBase
 
@property(nonatomic,assign)BNaviMapRefresh_Type_Enum eMapRefreshType; // 地图刷新消息, type of message for map refresh
 
@property(nonatomic,retain)BNaviCarPosition* carPosInfo;            // 车标位置信息, information for car position
 
@property(nonatomic,retain)NSArray* roadCondition;//路况数组，它的每一个元素是 BNaviRoadConditionItem 类型
 
@end
 

@interface BNaviPassViaPointInfo : BNNaviMsgBase
 
@property(nonatomic,assign) int enType;
//viaIndex 途经点的序号，第一途经点序号为0（在路线节点里序号为1）
//如算路节点如下:[起点、途径点0、途径点1、途径点2、终点]。viaIndex=0。代表是途径点0
@property(nonatomic,assign) int viaIndex;
 
@end
 
 

@interface BNaviLaneInfo : BNNaviMsgBase
 
@property (nonatomic, assign) BNaviMessage_Action_Enum eAction;
 
@end
 
 
 

@interface BNKMNaviSpeed : NSObject
 
@property (nonatomic, assign) int speed; // 单位km/h
 
@end
 
 
@interface BNIntervalSpeedModel : NSObject

@property (nonatomic, assign) NSInteger intervalLength;
@property (nonatomic, strong) BNaviDistanceDescriptionModel *intervalLengthModel;

@property (nonatomic, assign) NSInteger limitSpeed;

@property (nonatomic, assign) NSInteger limitAverageSpeed;

@property (nonatomic, assign) NSInteger limitAreaRemainDist;
@property (nonatomic, strong) BNaviDistanceDescriptionModel *limitAreaRemainDistModel;
//区间测速 状态
@property (nonatomic, assign) BNIntervalSpeedModelState state;
 
@end
 

@interface BNaviTruckTrafficSignInfo : BNNaviMsgBase
//限行，限重等枚举
@property(nonatomic) BNaviTruckTrafficSign trafficSignType;
//剩余距离
@property(nonatomic) NSInteger remainDistance;
 
@end
 

@interface BNaviMessageHelper : NSObject

+ (NSString *)typeNameForManeuverKind:(BNaviManeuver_Kind_Enum)type;
 
@end
@interface BNaviMainSlaveViaductInfo : BNNaviMsgBase
@property(nonatomic,assign)BN_MAB_VIEW_TYPE nChangeType; 
@end
@interface BNaviMainSlaveViaductMsg : BNNaviMsgBase
@property(nonatomic,assign)BOOL isSuccess;
 
@end

@interface BNaviHighwayContentModel : NSObject
@property (nonatomic, assign) BNaviHighwayInfoType highwayInfoType;
@property (nonatomic, copy) NSString *name;
@property (nonatomic, assign) NSUInteger remainDist;
@property (nonatomic, copy) NSArray<NSNumber *> *typeArray;
@property (nonatomic, copy) NSArray<NSString *> *typeIconStrArray;
@property (nonatomic, strong) BNaviDistanceDescriptionModel *disModel;
 
@end
@interface BNaviHighwayPanelModel : NSObject
@property (nonatomic, strong)  BNaviHighwayContentModel *topModel;
@property (nonatomic, strong)  BNaviHighwayContentModel *bottomModel;
@property (nonatomic, assign)  BNaviMessage_Action_Enum eAction; 
@end

@interface BNKCarPositionInfo : NSObject
@property(nonatomic, assign)double longitude;            
@property(nonatomic, assign)double latitude;             
@property(nonatomic, assign)float fPrecision;            
@property(nonatomic, assign)float fVPrecision;           
 
@end
 

@interface BNaviCameraInfoModel : NSObject
@property (nonatomic, assign) BN_Camera_Type type;  
@property (nonatomic, assign) double latitude;      
@property (nonatomic, assign) double longitude;     
@property (nonatomic, assign) int    dist;          
@property (nonatomic, assign) int    speedLimit;    
@end
 

@interface BNRouteLayerDetailModel : NSObject
@property (nonatomic, copy) NSString *title;
@property (nonatomic, copy) NSString *content;
@property (nonatomic, copy) NSString *evetnId;
@end